Due to high demand please allow 10 to 14 business days for parts to ship.
2021-Present F150 ext/crew cabs 2WD 4/6 Lowering Kit | IHC Suspension
 

Shop

2021-Present F150 ext/crew cabs 2WD 4/6 Lowering Kit

$945.00

-

IHC Suspension is excited to announce the most complete 2021 F150 4/6 lowering kit in the market. IHC Suspension coming from the service/installation side understood the challenges that other kits were not solving. Here are our key features that differentiate us from the competition and save you money!

  • FACTORY RIDE QUALITY
  • Alignment! No notching frame pockets for camber correction.
  • IHC control arm aligns to factory specs.
  • Standard Upper Control arms for camber correction included. (No additional parts needed like camber/caster bushing or offset ball joints to align)
  • IHC control arms run Delrin bushing for maximum performance, extended bushing life, and minimal maintenance.
  • IHC Flip kit has the correct pinion angle built in so no need to use pinion shims.
  • MADE IN THE USA!
  • Manufactured in TEXAS!
  • Lifetime warranty on all metal parts!

IHC Suspension designed 2021 F150 crew cab kit with Ride quality being the #1 goal. We achieved that by lowering the front end with custom control arms. You achieve the 4” with the lower control arm. Keeping stock spring, shocks, and spindles where OEM ride quality comes from. Upper control arms are standard in our kit to get your camber back in specs. Most kits require customers to notch frame pockets which are more time-consuming for installers and more money for labor to customer. Most times if notching is not done correctly lower control arms will constantly move and throw the alignment off. Not with IHC arms though.  The rear is lowered with a 7” flip kit and 1″ lift shackles are included to set at 6″.

 

Crew cabs did come out with 2 piece drive shaft. IHC suspension performed r&d and found that no vibration was noticeable. Carrier bearing bracket is not included in the kit. If vibration was to occur after installation carrier bearing bracket may be needed.

 

TRUCK PICTURED RUNNING 295/35/24′

SKU: IHC-F9009-CK Categories: , , , , ,
Installation Instructions

Installation Instructions

  • Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. IHC Suspension  is NOT responsible for any damage or failure resulting from improper installation

 

  • Estimated Installation Time: 7 Hours +/- 1 hour (excluding alignment)

 

 

Front Installation Instructions

Rear Installation Instructions

 

Fitment

Fitment

RECOMMENDED WHEEL/TIRE SIZE

  • STOCKS
  • 22’s –  285/45/22
  • 24’s – 295/35/24
  • Larger wheels recommend to check with local suspension shop

 

Fits all crew cabs with 2 piece driveshafts. Has not been test on long beds.

Components

Components

FRONT

  • Upper/Lower control arms
  • New ball Joints
  • New DELRIN bushings
  • Machined sleeve for LCA BJ

REAR

  • Flip kit
  • Drop Shocks
  • 1″ Lift Shackles

CARRIER BEARING IS OPTIONAL

Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

0
    0
    Your Cart
    Your cart is emptyReturn to Shop
    preloader